no anaesthesia
02-07-2006, 07:45 PM
Step by Step VGA connection to a pc monitor
ok so you need
1 a pc monitor
2 a vga cable
3 a female to female adapter
4 About 50 dollars (not sure)
5 ofcourse a XB360!!!
VGA CABLE pic: http://media.teamxbox.com/xbox-hardware/ss/40/1133487765.jpg
FEMALE TO FEMALE PIC
http://www.si87.com/images/gender-bender.jpg
Your monitor has a cable connected to your pc...unplug this and it should look something like this
http://z.about.com/d/hometheater/1/7/G/9/vga2.JPG
Then plug your VGA cable in to your XB360
Now you'll notice that by themselves these cables do not connect.
Here is where the female to female adaptor comes to play
plug your cables to the female to female adaptor like this
http://img204.imageshack.us/my.php?image=photo00082hr.jpg
CONGRATULATIONS you have succesfully connected your xb360 to ypur pc monitor NOW remember to set your xb360's resolution to the resolution your pc monitor supports you can do this from your *system* section on your dashboard
NOTE to acquire sound from the connection you'll need a system that has a L/R sound input
plug the two audio wires that leave from the VGA cable to your sound system that has a L/R audio input
ok so you need
1 a pc monitor
2 a vga cable
3 a female to female adapter
4 About 50 dollars (not sure)
5 ofcourse a XB360!!!
VGA CABLE pic: http://media.teamxbox.com/xbox-hardware/ss/40/1133487765.jpg
FEMALE TO FEMALE PIC
http://www.si87.com/images/gender-bender.jpg
Your monitor has a cable connected to your pc...unplug this and it should look something like this
http://z.about.com/d/hometheater/1/7/G/9/vga2.JPG
Then plug your VGA cable in to your XB360
Now you'll notice that by themselves these cables do not connect.
Here is where the female to female adaptor comes to play
plug your cables to the female to female adaptor like this
http://img204.imageshack.us/my.php?image=photo00082hr.jpg
CONGRATULATIONS you have succesfully connected your xb360 to ypur pc monitor NOW remember to set your xb360's resolution to the resolution your pc monitor supports you can do this from your *system* section on your dashboard
NOTE to acquire sound from the connection you'll need a system that has a L/R sound input
plug the two audio wires that leave from the VGA cable to your sound system that has a L/R audio input